SALIENT FEATURES:

• Forming station: Intermittent compressed air forming with option of plug assist
• Sealing station: Continuous rotary sealing
• Full function Servo motion controller in PLC
• Edge-to-edge pack cutting
• Feeding arrangements: Universal brush feeder/ dedicated feeder/ multi-feeder
• Shorter changeover time
• Utmost simplycity in operation and maintnance.
• Hot Perforation
• Direct interface with downstream machine

PACKING MATERIALS (BASE FILM)

• PVC Opaque or Transparent
• PVC with PVDC Coating
• PVC with PE/PVDC Lidding material
• Tempered aluminium with heat-sealable lacquer
• Compressed air requirement: 400 ltr./min.at 6 bar.
• Cooling water requirement: 2.5 ltr./min.at 10c-14c at 3 bar.
• Power: 415 v 3 Phase + N + E 50 Hz Other voltages on request. 13 kW peak, 8.5 kW Average.

FORMAT RANGE

BASE FILM:

• dth maxX: 230 mm
• Thickness max: 0.25 mm - 0.35 mm
• Reel dia max.: 440 mm

LIDDING MATERIAL:

• Width max.: 230 mm
• Thickness dia max.: 0.02 - 0.03 mm
• Reel dia max.: 220 mm
• Max format area: 214 mm x 192 mm

FORMING INDEXING

• Length: Min.60 mm & Max.180 mm
• Forming depth maximum.: 12 mm
• Output: 300 Blister packs/min (for a typical pack size).

SHIPPING DIMENSIONS FOR BASIC MACHINE

IT IS RECOMMENDED THAT THE MACHINE IS INSTALLED IN AIR CONDITIONED PREMISES HAVING ROOM TEMPERATURE OF 22 0C TO 26 0C TO ENSURE EFFICIENT WORKING” NOTE: SPECIFICATIONS ARE INDICATIVE AND WE RESERVE THE RIGHT TO MODIFY THEM WITHOUT PRIOR NOTICE.